Human hair & premium fiber · Sourced in Juancheng · Wholesale & OEM · Low MOQ · DDP quoted on request

Buyer guide - Brands and private label

Reading a supplier quality grade without being misled

Patrick - Sourcing lead at Zhipan Global - 2026-11-17

Quality terminology in this industry is only loosely enforced. Here is what each term means on the production floor, and how to write it into a purchase order so both sides mean the same thing.

The words the trade uses

Quality grades in this trade are labels, and labels are used loosely. The same word can mean two different things in two different quotes. Four properties do the work: treatment (virgin, virgin dyed, bleached and toned), alignment (Remy, cuticle aligned, non-Remy), drawing (double drawn, single drawn) and construction (machine double weft, single weft, PU weft, lace).

A supplier can quote you Remy and single drawn in the same line, because those answer different questions. Read any grade sheet against those four headings before you decide a term means what you hope. A wider screen of suppliers sits in the supplier vetting checklist.

Cuticle alignment

Every strand of hair is covered in a layer of overlapping scales, the cuticle. On aligned hair, all the scales face the same way along the strand, from the root down to the tip. On non-Remy hair they point in opposite directions on different strands.

That sounds cosmetic. It is not. Scales that face the other way catch on each other, so the hair tangles on its own, mats when it is damp and pulls out in the wash. Alignment also changes behaviour in water: aligned hair swells and dries predictably, while mixed hair goes frizzy and takes colour unevenly. The aligned set lies flatter and takes a brush; the mixed one tangles by the third day.

Remy is the trade word for alignment with the roots collected at one end, so the hair can be brushed from the top down like natural hair.

Double drawn, single drawn, Remy

These three are often sold as a ladder. In a specification they are not.

Single drawn means each strand was cut from one length of raw hair, so it is thick at the cut end and tapers to a thin tip. It is the cheapest way to make a full-length strand, and the taper shows in a set that has been worn and washed.

Double drawn means the hair has been drawn twice: strands are sorted by length, and a thin tip is matched against a thicker end so each finished strand stays full along its length. The ends look blunt and dense rather than pointed, and the set holds its body after washing. Our machine double weft line is specified on this basis, and the same choice is available on flat tip supply.

Remy describes alignment; double drawn describes how the strands were cut and sorted. A strand can be Remy and double drawn at once, so a quote giving only one of the two has left a gap. The Remy versus virgin guide sets out that comparison.

What human hair means as a floor

Human hair is the minimum, not the grade. Three material families sit in this trade: human hair, synthetic fibre, and a blend of the two.

  • Human hair. Real cut hair: it can be washed, dyed, straightened and heat-styled, and it blends with the client's own hair the way natural hair does.
  • Synthetic fibre. A manufactured filament. It holds a curl through a wash and the heat-friendly grades re-heat to 180 °C, but it is not hair and does not blend the way hair does.
  • Blend. Human hair through the top with synthetic through the lengths. It is lighter and cheaper, and it is always labelled as a blend rather than as full human hair.

The floor you write into the specification is simple: 100% human hair, cuticle aligned, in the drawing and the treatment you specify. Anything below that should be named on the label, because a blend and a full human set behave and cost differently.

What you can enforce at the factory gate

Grades are cheap to claim and expensive to check, so enforcement has to happen in writing and before the money moves.

Four things can be held: a written specification on the purchase order, a sample you approve before production, batch photos of your actual batch before it ships, and inspection of that batch before it leaves. The work is done by partner workshops in Juancheng, Shandong rather than in a factory of our own, and every batch is inspected before it ships, so those four points turn a grade claim into a deliverable.

Two commercial levers support the same thing. Samples are credited against the first large order, so approving a sample costs little, and the MOQ starts from 5 units per style, so a grade can be tested before a container.

Ask for the specification to be repeated on the packing list or the carton, so a substitution on the workshop floor is visible before the box is sealed. If you are visiting rather than buying blind, the factory audit checklist walks the building in order.

The QC checks worth paying for

  1. Cuticle alignment: take a lock, hold it at both ends and slide your fingers from the root down. If it drags on the way down, the cuticle is reversed.
  2. Shedding: stroke the hair firmly from the top down over a dark surface. A clean run with a few strands is normal, a handful of hair is not.
  3. Weight: check the pack against the stated net weight. Our machine double weft packs carry a tolerance of plus or minus 2 g.
  4. Length and ends: measure a sample strand stretched against the length ordered, and check the taper. A double drawn set feels blunt, not pointed.
  5. Wash and dry: the only honest test of cuticle behaviour is a wash, so ask for a sample you can wash before the batch is approved.

Specify the checks you want in the order rather than sending a checklist in a message. A workshop prices the QC time, and if it is not on the order it is not done.

Writing a spec a workshop can price

A specification is priced line by line. If a field is missing, the workshop either prices the cheapest version or quotes the job and waits for you, and both cost time.

The fields that have to be there: format and construction, net weight and piece count, lengths, texture, treatment, drawing, alignment, shade, and packaging. For wigs, density is a field too, quoted as a percentage of the cap: 130, 150 and 180 per cent on the lace units, 150, 180 and 200 per cent on the machine-made line.

Name the shade in the same sentence as the treatment, because the two interact: a specified tone on a treated base and on an unbleached base are two different jobs.

Keep the price basis in the quote. The published matrix is EXW Yiwu in USD, and FOB Qingdao adds inland haulage, export clearance and terminal charges on top, so the two numbers are not comparable. Quote every custom specification on the same basis and compare it against our published price matrix.

Write the specification once, with a number in every field, and reuse it for the next order.

Use this table to write a grade line in a purchase order that a workshop can price.
GradeWhat it means physicallyHow it behavesWhat to watch in the spec
VirginCut hair never chemically treatedKeeps natural pigment and cuticleAsk if it is genuinely unprocessed
Virgin dyedUntreated hair given a deposit, not a bleach bathSofter than bleachedSay deposit, not bleach, in the order
RemyCuticle aligned, roots collected at one endBrushes from the top downAlignment only, not the ends
Cuticle alignedScales on every strand face one wayLies flat, washes evenlySpecify alignment, not just Remy
Double drawnStrands drawn twice, thin tip matched to a thick endBlunt, dense ends that hold bodyAsk how the second draw is done
Single drawnEach strand cut from one length, tapering to a tipFeathered ends, less bodyConfirm single drawn if the price is low
Non-RemyScales face mixed directions across the bundleTang, mat when damp, shed in the washSpecify Remy if the client washes it

What we publish, so you can check us

We publish our wholesale prices rather than hiding them behind a contact form. Every Remy line, every length from 14 to 30 inches, four textures and both shade bands - with the weight per set stated for each. Check the numbers against any other supplier before you talk to us.

See the published price matrix

Next step

Download the full catalogue and price matrix, or send us your market and target price point and we will tell you which two or three of the nine lines actually sell there.

More guides

Talk to Us

Tell us what you’re building. We’ll quote it.

Share your market, your price point and the methods you need. We reply with real photos, exact specs and wholesale pricing — usually within one working day.

WeChat
+86 176 8173 8952
TikTok
@fan_chinahairextensions
Sourcing office
Office · Yiwu International Trade City · Hair partner workshops · Juancheng
Registered as Yiwu Zhipan Trading Firm (义乌市致潘贸易商行), Yiwu, Zhejiang
Trade terms
EXW Yiwu · FOB Qingdao · DDP on request · USD · HS 6703.00 / 6704.20
MOQ 5–10 units per style · T/T 30% deposit, 70% against copy of B/L
WhatsApp